Warehouse Projects listed by Town:

​

Bordentown, New Jersey:

-220 Bordentown-Hedding Road:  Bordentown, New Jersey 1,300,000 sf one story warehouse with 36'-0" clear height.

 

​-Central Crossings NEDC – Grainger:  Bordentown, NJ

1.3 million square foot distribution center plus 23,300 square foot of office mezzanines and 222,800 square foot of work platforms.  Steel and precast structural system.  Award winning, high performance floor with extended joint spacing (up to 29’-6” between control joints) and 512,300 square feet of Fmin 60 slab.

 

Bridgewater Township, New Jersey:

-STS, Inc.:  Bridgewater Township, New Jersey

199,800 square foot, 32’-0” clear height pile supported warehouse and a 6,500 square foot interior office mezzanine.  Exterior precast bearing walls and structural steel frame.  Also, 21,000 square feet of pile supported dolly pad ramps.

 

Bristol, Pennsylvania: 

-Bristol Commerce:  Bristol, Pennsylvania

59,520 square foot, 24’-0” clear height, flex warehouse space with tilt-up bearing panels and a steel frame.

 

Burlington, New Jersey: 

-Christmas Tree Shops Warehouse:  Burlington, New Jersey

Blank SF one story warehouse type structure with 68 foot clear height.

 

Carlisle, Pennsylvania:

-AMB I-81:  Carlisle, Pennsylvania

350,350 square foot, 32’-0” clear height warehouse. Precast bearing walls with interior steel frame.

 

Carteret, New Jersey:

-200 Milik:  Carteret, New Jersey

232,000 square foot, 36’-0” clear height warehouse space with precast bearing walls on steel frame.  Foundation is conventional grade supported slab.  Slab is strategically reinforced in dowel baskets and synthetic fibers.

 

-Bryla Distribution Center:  Carteret, New Jersey

New 460,000 square foot distribution center with precast bearing walls and steel frame.  In addition to cross dock, this facility also has train rail docks.  Foundations and slab design over a geopier system due to existing loose fill and a partially contaminated site.

 

​​ -I Port 12:  Carteret, New Jersey

Two industrial warehouse facilities consisting of 1,000,000 SF and 300,000 SF.  Both structures were built on a brown field site with buildings and structural floor slab supported on a deep driven pile system.

 

Clear Lake, Iowa:

-Windmill:  Clear Lake, Iowa

270,500 square foot pharmaceutical distribution center with 45,320 interior secure truck docks and a 22,000 low height office.  Steel frame with load bearing exterior and interior precast walls supported on conventional footings and grade supported slab.

 

Coxackie, New York:

-Empire North:  Coxsackie, New York

222,500 square foot, 37’-0” clear height warehouse with a 16,840 square foot per floor, two story office and 17,000 square foot total storage mezzanines.  Exterior precast bearing walls and interior structural steel frame.

 

Cranbury, New Jersey:

-66 Station Road, Cranbury Pk S Bldg 2:  Cranbury, New Jersey

600,350 sf one story warehouse with 36'-0 clear height.

​

-66 Station Road, Cranbury Pk S Bldg 3:  Cranbury, New Jersey

210,100 sf one story warehouse with 36'-0 clear height.

 

-Cranbury South 2:  Cranbury, New Jersey

600,350 square foot, 36’-0” clear height warehouse with precast bearing walls and structural steel frame.

 

​-Cranbury South 3:  Cranbury, New Jersey

210,100 square foot, 36’-0” clear height warehouse with precast bearing walls and structural steel frame.

 

East Brunswick, New Jersey:

-Edgeboro Warehouse:  East Brunswick, New Jersey

535,000 sf one story warehouse facility with 40 foot clear height.  Tilt-up concrete wall panels designed and detailed by HHPC.

 

East Rutherford, New Jersey:

-406 Murray Hill Parkway:  East Rutherford, New Jersey

76,500 square feet speculative warehouse with a conventional steel joist and joist girder frame supported on precast exterior bearing walls.  Conventional grade supported footings and slab constructed over existing foundation and slab of previous building.

 

Edison, New Jersey:

-3003 Woodbridge:  Edison, New Jersey

770,820 square foot rehabilitation of a manufacturing plant into a larger bay warehouse.  Clear height to 55 feet.  New precast bearing wall façade at new loading docks.

​

-Warehouse/Distribution Center, Edison, New Jersey

A +1,000,000 sq ft. new facility with a 200,000 sq. ft. interior mezzanine.  Tilt-up concrete load bearing perimeter wall construction.  Steel frame with structure at 40 foot clear height.

 

Elizabeth, New Jersey:

-AMB Portview 2:  Elizabeth, New Jersey

97,430 square foot expansion and 51,000 square foot rehabilitation of existing high bay warehouse.  Precast bearing walls and steel frame.

 

-Fedex EWRRT BTS:  Elizabeth, New Jersey

152,200 square foot, build-to-suit commerce center with a 25,000 square foot vehicle maintenance garage.  Precast exterior bearing wall panels with interior steel frame.  Foundations are conventional grade supported slabs on grade in synthetic fiber reinforcing.

 

 -Portview 3:  Elizabeth, New Jersey

62,100 square foot, 24’-0” flex warehouse space.  Precast bearing walls with steel interior frame.

 

Flemington, New Jersey:

-Johanna Foods Warehouse, Silverberg-Flemington, New Jersey

37,000 sq ft warehouse and production facility.

​

Florence, New Jersey:

-Christmas Tree Shops 68:  Florence, New Jersey

711,000 square foot, 68’-0’ clear height warehouse space with a 10,000 square foot low roof office area.  Structural steel frame with exterior metal skin.

 

Foster Township, New Jersey:

-Highridge Distribution Center:  Foster Township, Pennsylvania

676,775 square foot, 32’-0” clear height precast exterior bearing walls with interior steel frame.

 

-Keystone Blvd., Lot 10:  Foster Township, New Jersey

676,775 sf one story warehouse with 32'-0 clear height.

 

Franklin, New Jersey:

-AMB Franklin:  Franklin Township, New Jersey

366,900 square foot, 32’-0” clear height warehouse with a steel frame and exterior precast walls.

 

-Jensen Drive:  Franklin, New Jersey

366,900 sf one story warehouse with irregular 32'-0 clear height.

 

Greencastle, Pennsylvania:

-World Kitchen:  Greencastle, Pennsylvania

Recladding and rehabilitation of a 1960s, 1970s, and 1980s, 1,011,000 square foot warehouse to bring up to current Global FM standards.  Also included the design of underpinning to add loading docks.

 

Hamilton Township, New Jersey:

-8 Black Forest:  Hamilton Township, New Jersey

23,300 square foot flex space.  Steel frame with precast bearing exterior walls, 22’-0” clear height.

 

-CJM Troil:  Hamilton Township, New Jersey

22,140 square foot steel frame warehouse with tilt-up panels bearing walls and 2,860 square foot mezzanine.  Conventional grade supported foundations and grade supported slab with integral spill containment system.

 

-ECT BTS – Black Forest Road:  Hamilton Township, New Jersey

22,500 square feet build to suit warehouse/office space with steel interior frame and tilt-up exterior bearing walls and a 2,600 sq ft office mezzanine (designed to allow for future heavy storage).  Conventional grade supported footings and slab.  32’-0” clear design height.

 

-Longchamp Warehouse:  Hamilton, New Jersey

52,500 square foot, 32’-0” clear height warehouse space.  Precast bearing wall panels with steel roof framing.

 

Jersey City, New Jersey:

-219-295 Rte 1&9:  Jersey City, New Jersey

878,300 sf one story warehouse with 36'-0 clear height.

 

-AMB Pulaski:  Jersey City, New Jersey

878,300 square foot, 36’-0” clear height warehouse structural steel frame with precast exterior bearing walls.

 

-Pulaski Distribution Center:  Jersey City, New Jersey

878,000 square foot distribution center with 345,000 square feet revised to build-to-suit with hung conveyors and a 24,500 square feet of freezer storage.  Precast exterior bearing with steel frame.  Foundation and slab design on load transfer platform over CMC ground improvement system.

 

-Triport -BTB Warehouse:  Jersey City, New Jersey

720,000 sf one story warehouse facility with 40 foot clear height.  Built using conventional spread footings on a site with ground improvement techniques.

​

​Kearny, New Jersey:

-River Terminal Development Buildings A & B: Kearny, New Jersey

Mirror image 188,000 square foot warehouses on piles.  36’-0” clear height.  Precast bearing walls with steel frames.  Design for future 26,000 square foot mezzanine.

 

-RTD, Buildings A and B:  Kearney, New Jersey

Mirror image 235,200 square foot, 36’0” clear height pile supported warehouses.  Combined exterior precast bearing and non-bearing walls with steel frame.

 

-RTD Bldg 1:  Kearny, New Jersey

235,200 sf one story warehouse with 36'-0 clear height.

 

​-RTD Bldg 2:  Kearny, New Jersey

235,200 sf one story warehouse with 36'-0 clear height.

 

​-RTD 50 Cable:  Kearny, New Jersey

188,000 square foot single sided dock flex warehouse.  Structural steel frame with the center portion design using precast bearing wall panels.  Design included allowances for 26,000 square foot of future office mezzanine space.  Slab and foundations supported on engineered ground improvements intrusions with engineered load transfer platform.

 

Linden, New Jersey:

-301 Pleasant Street:  Linden, New Jersey

144,000 sf one story warehouse with 36'-0 clear height.

 

​-Legacy Square Building 13:  Linden, New Jersey

144,000 square foot, 36’ clear flex warehouse structure with interior steel frame and exterior precast bearing wall panels.  Slab was a strategically reinforced slab on grade using synthetic macrofibers and steel load plate baskets.

 

Lower Macungie, Pennsylvania:

-8008 Quarry Rd. Bldg 1:  Lower Macungie, New Jersey

700,000 sf one story warehouse with 32'-0 clear height.

​

-8008 Quarry Rd. Bldg 2:  Lower Macungie, New Jersey

532,000 sf one story warehouse with 32'-0 clear height.

​

-8018 Quarry Road:  Lower Macungie, Pennsylvania

456,000 square foot, 32’-0” clear height, spec warehouse with precast exterior bearing walls and steel frame.

 

​-Liberty Lot 5:  Lower Macungie Township, Pennsylvania

1.2 million square foot, 36’-0” clear height spec warehouse with a conventional steel frame of open web steel joist and joist girders.  Exterior bearing walls of tilt-up concrete panels with interior braced frames to resist lateral forces.  Conventional grade supported footings and slab.

 

Lower Nazareth, Pennsylvania:

-Lehigh Valley East 4:  Lower Nazareth Township, Pennsylvania

484,000 sq ft, single sided dock warehouse with a steel frame and precast exterior bearing wall panels.  Conventional foundations designed to 10’-0” temporary loss of support due to a site prone to sinkholes.  Synthetic macrofiber reinforced slab on grade.

 

Milford Township, Pennsylvania:

-3000 Am Drive:  Milford Township, Pennsylvania

219,000 square foot addition to an existing tilt-up panel warehouse.  Removal, shoring, and reconstruction of portions of the existing facility to remove bearing walls and allow for free traffic flow between the existing facility and new addition.

 

Mine Hill, New Jersey:

-ReCommunity Recycling Facility:  Mine Hill, New Jersey

 

Monmouth Junction, New Jersey:

-60 Deans Rhode Hall Road:  Monmouth Junction, New Jersey

226,800 sf one story warehouse with 32'-0 clear height.

 

-Coca Cola Enterprises:  Monmouth Junction, New Jersey

226,800 square foot, 32’-0” clear height combination bearing and non-bearing precast walls and structural steel frame.

​

Monroe, New Jersey

-S38:  Monroe, New Jersey

130,000 sq ft warehouse facility.

-S126:  Monroe, New Jersey

140,000 sq ft warehouse facility.

 

Montgomery, New York: 

-Project Blackhawk:  Montgomery, New York

270,500 square foot pharmaceutical distribution center with 45,320 interior secure truck docks and a 24,000 low height office.  Steel frame with load bearing exterior and interior precast walls supported on conventional footings and grade supported slab.

 

Nazareth, Pennsylvania:

-Park 33, Building 1 Expansion:  Nazareth, Pennsylvania

135,000 square foot addition. 32’-0” clear height.  Precast bearing walls with steel frame.  Steel fiber reinforced slab on grade.

​

-Park 33 S Bldg 1:  Nazareth, New Jersey

878,300 sf one story warehouse with 36'-0 clear height.

 

-Park 33, Building 1:  Nazareth, Pennsylvania

930,000 square foot, 32’-0” clear height warehouse with steel frame and exterior precast walls.

 

Newark, New Jersey: 

-Newark Farmers Market:  Newark, New Jersey

166,460 square foot, refrigerated warehouse with steel framing and exterior insulated panels on steel girts.  13,700 square foot office mezzanine.

 

Oldmans Township, New Jersey:

-Block 29 Lot 6.06:  Oldmans Township, New Jersey

202,500 sf one story warehouse with 38'-0 clear height.

 

​-Gateway Business Park Salem 250:  Oldmans Township, NJ

263,500 square feet spec warehouse of steel interior frame with precast exterior bearing walls.  Conventional grade supported footings and slab.

 

​-Gateway Business Park Salem 700:  Oldmans Township, NJ

705,000 square feet spec warehouse of steel interior frame with precast exterior bearing walls.  Conventional grade supported footings and slab.

 

-Goya Foods:  Oldmans Township, New Jersey

202,500 square foot, 38’-0” clear height, partially refrigerated warehouse space with an 8,580 square foot office mezzanine.  Exterior precast bearing walls and a structural steel frame.

 

Philadelphia, Pennsylvania:

-1 Red Lion Road:  Philadelphia, Pennsylvania

930,000 sf one story warehouse with very irregular 40'-0" clear height.

 

-TEVA Pharmaceutical Distribution Center:  Philadelphia, PA

930,000 square foot facility with 225,000 square feet of rack-supported automated storage and retrieval space, corporate offices, and data storage.  Specialty designed slab and foundations for automated system and secure/vault storage.

 

Piscataway, New Jersey:

-​5 Access Road:  Piscataway, New Jersey

278,000 square foot spec warehouse.  Steel structure with braced frames and load bearing exterior precast walls supported on conventional footings and grade supported slab.  36’-0” clear height throughout.

 

-6 Corporate Place:  Piscataway, New Jersey

91,300 square foot spec warehouse.  Steel structure with load bearing exterior precast walls supported on conventional footings and grade supported slab.  All lateral loads diaphragm to exterior precast shear walls.  36’-0” clear height though out.

 

-South Washington Park, Buildings 1 and 2:  Piscataway, NJ

Building 1: 305,400 square feet, Building 2: 226,900 square feet.  Designed with tilt-up bearing wall panels and with alternate precast panels.  Steel frame with conventional grade supported foundations and slab.

​

Rahway, New Jersey:

-1400 Randolph Avenue:  Rahway, New Jesey

430,000 sq ft one story warehouse facility.

​

Ramsey, New Jersey

-Porcelanosa:  Ramsey, New Jersey

A new retail and warehouse facility consisting of approx. 80,000  sq ft. and subsequent additions.

​

Ridgefield, New Jersey:

-1 Bell Drive:  Ridgefield, New Jersey

195,225 sf one story warehouse with 36'-0 clear height.

 

​-Metro Point Logistics Bldg A:  Ridgefield, New Jersey

195,225 square feet, 36’-0” clear height spec warehouse of steel frame with precast exterior bearing walls.  Conventional grade supported footings and slab.  Lateral system of light steel moment frame.

 

-Metro Point Logistics Bldg B:  Ridgefield, New Jersey

83,100 square feet, 36’-0” clear height spec warehouse of steel frame with precast exterior bearing walls.  Conventional grade supported footings and slab.  All lateral loads diaphragmed to exterior precast shear walls.

 

Robbinsville, New Jersey:

-Building MWT 500:  Robbinsville, New Jersey

132,000 square foot, 28’-0” clear height, refrigerated warehouse with an 18,000 square foot, low roof office.  Precast bearing walls with steel framing.

 

-Sleepy’s Exp.:  Robbinsville, New Jersey

86,950 square foot addition with 28,600 square foot of loading mezzanine.  Clear storage height of 32’-6”.  Precast bearing walls with structural steel frame.

 

Secaucus, New Jersey:

-1 Mikasa Drive:  Secaucus, New Jersey

312,400 sf one story warehouse with 45'-0 clear height.

 

-Century 21:  Secaucus, New Jersey

312,400 square foot, 45’-0” clear height pile supported warehouse with braced steel frame and exterior precast walls.

 

 -FedEx Ground Facility:  Secaucus, New Jersey

305,000 square foot facility plus 2,900 square feet of low height office appendages.  Steel frame with exterior precast wall panels and grade supported footings and slabs.

 

-Secaucus Road:  Secaucus, New Jersey

305,000 sf one story warehouse with irregular 36'-0" clear height.

 

South Brunswick, New Jersey:

​-11 Commerce:  South Brunswick, New Jersey

225,225 square foot, 32’-0” clear height warehouse with steel frame and exterior precast bearing walls.

 

-35 Commerce:  South Brunswick, New Jersey

100,600 square foot, 32’-0” clear height warehouse with a steel frame and exterior precast bearing walls.

 

-130 Interstate:  South Brunswick, New Jersey

174,700 square foot addition of tilt-up bearing wall panels and an interior steel frame.

 

 ​-3905 US Rte. 1:  South Brunswick, New Jersey

352,800 sf one story warehouse with irregular 36'-0 clear height.

 

-Freight Distribution:  South Brunswick, New Jersey

550,000 sf one story warehouse with 36'-0 clear height.

 

-Hyundai:  South Brunswick, New Jersey

352,800 square foot, 36’-0” clear height warehouse with structural steel frame and exterior masonry walls.

 

-S124A:  South Brunswick, New Jersey

168,500 square foot, 30’-0” clear height addition to the existing warehouse.  Exterior masonry walls with a double cantilever steel frame.

 

-WW Granger Warehouse:  South Brunswick, New Jersey

​

South Plainfield, New Jersey:

-Cultech:  South Plainfield, New Jersey

139,600 square foot warehouse/production facility with an 11,750 square foot office mezzanine.  Combination precast exterior bearing walls and steel frame insulated metal panel façade.

 

St Croix, Virgin Islands: 

-Diageo Barrel Warehouses:  St. Croix, Virgin Islands

Slab and foundation design for two 103,500 square foot pre-engineered structures.

 

Teterboro, New Jersey:

-Teterboro Landing Light Industrial:  Teterboro, New Jersey

156,320 square foot light industrial building with a 1,050 square foot 70 foot tower.  Original design was for a speculative warehouse space but became a Build to Suit project early in the design.  To meet tenant’s aggressive schedule, design was revised to allow the steel to be erected prior to the precast bearing wall panels using temporary columns.

-T43:  Teterboro, New Jersey

220,000 sq ft warehouse facility.

 

Trenton, New Jersey:

-Standard Roofing:  Trenton, New Jersey

Foundation and slab on grade design for a 23,750 square foot pre-engineered metal building.

 

Washington Township, New Jersey:

-Bohren’s Moving and Storage Addition:  Washington Twp., NJ

49,700 square foot, 32’-0” clear height warehouse with steel frame and precast bearing walls.

 

Willingboro, New Jersey:

-Medco.:  Willingboro, New Jersey

39,700 square foot conditioned space warehouse addition with a 1,556 square foot mechanical mezzanine, 41’-0” clear height. Structural steel frame with precast bearing walls.

 

Woodbridge Township, New Jersey:

-Port Reading Building 2:  Woodbridge Township, New Jersey

737,600 square foot cross dock distribution center with precast walls and steel frame.

 

-Port Reading Building 2a:  Woodbridge Township, New Jersey

166,950 square foot, single-sided dock distribution center with precast walls and steel frame.

 

​-Port Reading Building 3:  Woodbridge Township, New Jersey

737,600 square foot cross dock distribution center with precast walls and steel frame.

 

-Port Reading Building 4:  Woodbridge Township, New Jersey

280,380 square foot cross dock distribution center with precast walls and steel frame.  Designed with an allowance for future ballasted solar array.  Also designed to allow the steel to be erected prior to the precast bearing wall panels using temporary columns.